RFP-3B-RX/TX Radio Transceiver / controller 0870-05_R3/R4 /860 MHz

This product has been discontinued. Its data is still reachable on our site for support purposes. Please find its replacement product in Recommended products section below.

Kurzbeschreibung

Radio Transceiver / controller 433 or 868 MHz, SMA connection prepared.
RFP-3 is a hybrid data radio module built with nRF true single chip system: integrated radio frequency transceiver with embedded microcontroller and a 4 input (10bit 80ksps) ADC converter, antenna filter and adapter system for connecting an 50 Ohm antenna, 50 Ohm SMA antenna connection prepared.
The transceiver of the system among others supports ShockBurst technology, which handles the automatic "allocation", addressing and CRC default correcting. The circuit has embedded voltage regulators, which provides maximal noise immunity and allows operation on a single 3.6V to 5.5 V supply. The module is compatible with FCC CFR47 standard and ETSI EN 200-1. It operates in licence-free frequency bands.

Eigenschaften

  • 8051 compatible embedded microcontroller
  • 4 input, 10bit 80ksps ADC
  • 3,6V - 5,5V power supply
  • Embedded antenna interfacing
  • 2.5µA operating current (standby) with timed or outer wakeup
  • Adjustable output power up to 10dBm
  • Channel switching time less than 650µs
  • Low TX (transmit) current, 12mA (at -10dBm)
  • Low RX (receive) current; 12.5mA peak
  • Low MCU current; 2.6mA (16MHz / on 3V)
  • Carrier Detect signal for Listen Before Transmit protocol
  • SMA antenna connection prepared
  • External antenna connection

Typen

RFP-3A: 433 MHz
RFP-3B: 868 MHz

Produktinformation

Produktcode: 140871
Hersteller:
Procontrol

Verfügbarkeit

Archiv